.
Panels are numbered on top: I, II, III, IV. Install and then
repeat.
Panel Sizes:
26" x 24" High
26" x 36" High
26" x 48" High |
26" x 28" High
26" x 40" High
52" x 24" High |
26" x 32" High
26" x 44" High
52" x 28" High |
|
|
.
Pull a line under the house and dig a 2" - 4" trench (below
frost line) measuring the desired height.
NOTE: Footings are required in
northern zones.
. |
|
.
Install back rail and attach panels with screws through the
tabs. Adhere panels together with F26 adhesive. |
|
. .
Install panels with vents as needed. Standard vents are 6" from
the top, in every 6th panel. |
|
.
Miter or butt the corners and adhere with F26 adhesive.
The
vents are factory installed or may be cut in as needed. |
|
.
Install the cap to the back rail.
Alternate installations: fit
panels under the house and screw-attach to the framing or use
top ledges (no back rail and cap) and glue ledge on top of
panel, under siding lap. |
|
.
Grout the joints and fill in the trench with soil or concrete. |
|
.
Install step kit and chimney kit. |
|